Listening To The Radio; Tuning The Fm Radio - Jensen JiTS-300i User Manual

your iPod/iPhone onto the connector in the docking bay.
2. Your iPod/iPhone will communicate with the JiTS-300i. When it finished, press and
hold the TIME SYNC button on the remote control for 3 seconds. It will sync the
time with your iPod/iPhone time and show it on the LCD display after about 3
seconds.
Tips:
The iPhone receives constant updates from the phone service provider, so the
iPhone time will always be accurate.
The time on your iPod was undated with your computer the last time the iPod was
attached and synced with it. We recommend you to calibrate your computer's
system clock and sync your iPod with iTunes right before docking into the unit to
make sure the current time is accurate.
The Automatic Time Sync does not support earlier iPod models, like iPod mini and
iPod photo (4G/color display)
When first docked, the iPod/iPhone will run an authentication process internally, so
it may not respond to any keys when pressed.
A 59 second difference between the clock on the unit and the synced iPod/iPhone is
possible.
Note: If you need to change the time after using the time sync, you will have to do it
manually.
TO SET THE TIME MANUALLY
In unit standby mode,
1. Press and hold the PLAY/PAUSE
button on the remote until Hour flashes on the screen with "CLK" shows on the
screen.
2. Press the /
Note: Make sure the hour is set so that the PM indicator is displayed correctly.
3. Press the PLAY/PAUSE button on the unit or TIME SET/MEMORY button on the
remote to confirm. Minute digits start blinking on the screen to prompt for input.
4. Press the /
5. Press button on the unit or TIME SET/MEMORY button on the remote again to
complete the setting.

TUNING THE FM RADIO

1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select TUNER (RADIO) mode.
3. To manually tune the radio station, press TUNING+/- button on the unit or
button repeatedly to adjust the hour.
button repeatedly to adjust the minute.

LISTENING TO THE RADIO

button on the unit or TIME SET/MEMORY
3
/