Alarm Operations - Jensen JiMS-215i User Manual

Docking digital cd clock radio for ipod and iphone
Table of Contents

Advertisement

NOTES ON HANDLING COMPACT DISCS
 Do not expose the disc to direct sunlight, high humidity or high temperatures for
extended periods of time.
 Discs should be returned to their cases after using.
 Do not attach label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
 Handle the Disc by its edge. Do not touch the playing surface (glossy side).
 Fingerprints and dust should be carefully wiped off the playing surface of the disc
with a soft cloth. Wipe in a straight motion from the center to the outside of the disc.
 Never use chemicals such as record cleaning sprays, antistatic sprays or fluids,
benzene or thinner to clean compact discs.
Your JiMS-215i provides Wake to iPod, Radio, CD or Alarm.
SETTING ALARM TIME
Note: Alarm time can only be set in "POWER ON" mode after the current time is set.
1.)
To set the wakeup time, press and hold the ALARM
seconds until the hour digit blinks and "Alarm" will light.
2.)
When the hour digit blinks, press the
digit.
Note: For the 12 Hour format, Make sure the Hour is set so that AM or PM is correctly
There is a PM Indicator located underneath the Hour digit. The
displayed.
displayed time is PM
indicator is off.
3.)
Press the ALARM Button to save the hour setting, the minute digits will blink.
4.)
When the minute digits blink, press the
minute digit.
5.)
Press the ALARM Button to
SETTING THE WAKEUP MODE
6.)
Following step 5 above, press the ALARM Button once to enter the wake up
selection mode.
Note: "EUNE" stands and for Wake to Radio, "Cd" stands for Wake to CD, "IPOd"
stands for Wake to iPod/iPhone and "bU22" stands for Wake to Alarm.
i.
Wake to Radio
-
Repeatedly press the
"EUNE", appears and blinks on the Display.
-
Press the ALARM Button again to enter the VOLUME setting mode. The Volume
Digit will blink on the Display.
-
Repeatedly press the
appears and blinks on the Display then press the ALARM Button to complete the
setting.
-
Press the STANDBY

ALARM OPERATIONS

when the indicator is lit. The displayed time is AM when the
save the
wakeup setting.
or
Buttons until the "Wake to Radio" Indicator,
or
Buttons until the desired Volume level (10-30)
Button to turn
15
Button
or
Buttons to adjust your desired hour
or
buttons to adjust your desired
the
JiMS-215i off. The Radio will come on
for approximately 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents