Jensen JiMS-215i User Manual page 20

Unit turned to CD or radio
mode.
iPod/iPhone is not
iPod/iPhone
installed properly.
does not charge.
iPod/iPhone is locked up/
frozen. iPod/iPhone
battery has problem.
Weak FM FM antenna wire is not
reception fully extended.
CD player will - Unit not in CD function
not play mode.
- CD is not loaded
properly.
- If the CD is self-
compiled, the media
used may not be
compatible with the
player.
CD skips while - Disc is dirty or
playing scratched.
- Dirty or defective disc
- Dirty pick up lens
Intermittent
sound from CD
- Player is subject to
player
excessive shock or
vibration
Volume level is set too
Sound is
distorted.
Sound source is distorted.
Select other modes for iPod charging.
Remove your iPod/iPhone from the dock and
check for obstruction on the connectors in the
dock and on your iPod/iPhone. Then reseat it
in the dock.
Please make sure your iPod/iPhone is
working properly before docking into the unit.
Please refer to your iPod/iPhone manual for
details on resetting.
Extend or reposition the wire antenna for best
reception.
- Select CD function mode.
- Load CD with label side up.
- Use better quality blank media and retest.
- Wipe CD with clean cloth or use another disc.
- Clean or replace the defective disc.
- Use a CD lens cleaning disc to clean the
lens.
- Relocate the player away from shock or
vibration.
high.
If the iPod/iPhone original sound source is of
poor quality, distortion and noise are easily
noticed with high-power speakers. Try a
different audio source such as a music CD.
If you are using an external sound source like
older generation of iPod, try reducing the
output volume on the device itself. Also try
turning bass boost OFF or change the EQ
setting.
19
Decrease the volume.