Entering An Address With A Postal Code - ZENEC GPS NAVIGATION SYSTEM Main User Manual

7. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap

3.1.1.5 Entering an address with a postal code

All of the above address searching possibilities can be performed with entering the postal
code instead of the city/town name. Find below an example with a full address:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap the following buttons:
3. If necessary, modify the country as described earlier (page 25).
4. Enter a new city/town using its postal code:
a. Tap
b. Tap
c. Start entering the postal code.
d. Find the city/town you need:
The most likely postal code is always shown in the input field. To accept
it, tap
If the desired number does not show up, open the list of results by
tapping
5. Enter the street name:
a. Tap
.
to open the numeric keypad.
.
.
31
and start your journey.
to return to the Navigation
. Select the postal code from the list.
to modify route
, .