Object Types; Elements Of The Active Route - ZENEC GPS NAVIGATION SYSTEM Main User Manual

Tap any of them to display it on the map and add it as a waypoint to your route if needed.
If you want to display other types of Places for the exits, you can change the icons in Visual
Guidance settings (page 74).
2.3.3.6 3D object types
ZENEC device supports the following 3D object types:
Type
3D terrain 3D terrain map data shows changes in terrain, elevations or depressions in
the land when you view the map in 2D, and use it to plot the route map in
3D when you navigate. Hills and mountains are shown in the background of
the 3D map, and illustrated by colour and shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as overpasses or
bridges) are displayed in 3D.
3D landmarks Landmarks are 3D artistic or block representations of prominent or well-
known objects.
3D buildings
3D block representation of full city building data containing actual building
size and position on the map.

2.3.3.7 Elements of the active route

ZENEC device shows the route in the following way:
Symbol
Current GPS position and
Start point
Waypoint (intermediate
destination)
Destination (end point)
Route colour
Name
Your current position displayed on the map. If
roads are near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no valid
GPS position, ZENEC device uses the last
known position as the start point.
An intermediate destination of the route before
reaching the final destination.
The final destination of the route.
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
Description
Description
17