Entering An Address With A Postal Code - ZENEC GPS NAVIGATION SYSTEM User Manual

3.1.2.5 Entering an address with a postal code

All of the above address searching possibilities can be performed with entering the postal
code instead of the city/town name. Find below an example with a full address:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap the following buttons:
3. If necessary, modify the country as described earlier (page 36).
4. Enter a new city/town using its postal code:
a. Tap
b. Tap
c. Start entering the postal code.
d. Find the city/town you need:
•
The most likely postal code is always shown in the input field. To accept
it, tap
•
If the desired number does not show up, open the list of results by
tapping
5. Enter the street name:
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
•
The most likely street name is always shown in the input field. To accept
it, tap
.
to open the numeric keypad.
.
.
.
43
to return to the Navigation
. Select the postal code from the list.
, .