ZENEC GPS NAVIGATION SYSTEM Main User Manual page 9

Button with
value
Icon
List
Radio
button
Switch
Slider
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After
the change, the new value
is shown on the button.
Shows status information.
When you need to select
from several options, they
appear in a list.
When there are only a few
choices, radio buttons
may be used instead of
lists. Only one value can
be selected.
When there are only two
choices, a checkmark
shows whether the
feature is enabled.
When a feature can be
set to different values in a
range, ZENEC device
shows an indicator on a
gauge that displays and
sets the value.
9
Tap it once.
Some icons also
function as a button.
Tap them once.
Grab the list anywhere
and slide your finger up
or down. Depending on
the speed of the
sliding, the list will scroll
fast or slow, only a bit
or till the end.
Alternatively, move
between pages with the
and
buttons and
tap the value that you
want.
Tap one of the buttons
to select a new value.
Tap it to turn the switch
on or off.
Drag the handle
to move the
slider to its new
position.
Tap the slider
where you want
the handle to
appear; the
thumb jumps
there.