Customise Quick Menu; Traffic Settings - ZENEC GPS NAVIGATION SYSTEM Main User Manual

5.3.2 Customise Quick menu

The content of the Quick menu (page 20) is fully customisable. Tap the button you want to
change, and select its new function from the list.
The list of available functions and their descriptions are on page 20.

5.3.3 Traffic settings

The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button
Use this switch to enable or disable historical traffic data and traffic
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to
turn off in order not to take into account normal weekday traffic jams.
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
ZENEC device will automatically search for available TMC stations
and tune in to receive them. If you would like to determine which
station to use, turn off automatic tuning and use the left and right
arrows on the Traffic Summary screen for manual tuning. If automatic
tuning is turned off and you leave the reception area of the selected
frequency, ZENEC device cannot receive live traffic information until
you return into the area or you turn the automatic tuning on again.
When premium (paid) TMC is available at your location and you have
a valid subscription, ZENEC device will use this service instead of
the free public traffic information. If you want to use the public service
instead, turn this switch off and the paid services will be disregarded.
This setting determines how ZENEC device uses the received real-
time traffic information in route calculation. When calculating a new
route, or when recalculation becomes necessary based on the
received Traffic events, ZENEC device avoids traffic events if it
makes sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Tap this button to open the list of traffic event types, and select which
events to take into account in route calculation.
Description
69