Entering The Coordinate Of The Destination - ZENEC GPS NAVIGATION SYSTEM Main User Manual

3.1.7 Entering the coordinate of the destination

You can also select a destination by entering its coordinate. Do as follows:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap
3. Tap
4. You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
5. (optional) If necessary, tap
the coordinate in UTM format.
6. When finished, tap
7. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
location. Tap
.
.
to confirm the destination, or tap
to select a different destination.
47
to return to the Navigation
.
then
) appears at the new
and enter