Speed Limit Warning; Battery And Gps Position Quality Indicators - ZENEC GPS NAVIGATION SYSTEM Main User Manual

5.1.6 Speed limit warning

Maps may contain information about the speed limits of the road segments. ZENEC device
is able to warn you if you exceed the current limit. This information may not be available for
your region (ask your local dealer), or may not be fully correct for all roads in the map. Speed
warning can be fine-tuned in Sound and Warning settings (page 67).
You can set the relative speed above which the application initiates the warning.
The following alert types are available:
Audio warning: you receive a verbal warning when you exceed the speed limit with the
given percentage.
Visual warning: the current speed limit is shown on the map when you exceed it (for
example:
You can also choose to see the speed limit sign on the map all the time.

5.1.7 Battery and GPS position quality indicators

You can find useful information in the top corners of menu screens.
In the top right corner, the GPS reception quality icon shows the current accuracy of the
position information.
Icon
).
ZENEC device has no connection to the GPS receiver: GPS
navigation is not possible.
Devices with a built-in GPS receiver are permanently connected.
On such devices, the icon does not appear in normal
circumstances.
ZENEC device is connected to the GPS receiver, but the signal is
too weak and the receiver cannot determine the GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is available,
but elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be
significant.
Altitude information is available, the position is a 3D position.
GPS navigation is possible.
Description
62