Navigation Menu; Buttons And Other Controls On The Screen - ZENEC GPS NAVIGATION SYSTEM Main User Manual

2.1 Navigation menu

You can reach all parts of ZENEC device from the Navigation menu.
You have the following options:
Tap
a place of interest, a location on the map or one of your Favourite destinations. You
can also look up your recent destinations from the Smart History or enter a coordinate.
Tap
on the map. You can also perform route-related actions such as editing or cancelling
your route, setting a start point for the route, picking route alternatives, avoiding parts
of the route, simulating navigation or adding the destination to your Favourites.
Tap
simulate demo routes or to run some additional applications.
Tap
live map that shows your current position, the recommended route and the surrounding
map area. Tap the button to enlarge the map to the full screen.
Tap to open the Traffic Summary screen.

2.2 Buttons and other controls on the screen

When you are using ZENEC device, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, ZENEC device saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type
Button
to select your destination by entering an address or selecting
to display the route parameters and the route in its full length
to customise the way the navigation software works, to
to start navigating on the map. The button itself is a miniature
Example
Tap it to initiate a function,
to open a new screen, or
to set a parameter.
Description
8
How to use it
Tap it once.