Monitor / Default Setting / Auto Scan Timer - Eiki LC-XIP2600 Owner's Manual

Registering And Configuring The Projector
System Setting
Monitor
Item
Lamp Timer
Air Filter Alert
System Status/
Tempeture Level
Input Source
Default Setting
Item
Lamp Timer Alert (Hr.)
Air Filter Alert (Hr.)
Auto Scan Timer
(minutes)
Auto Scan Timer
Projector Number (Sets) Timer Interval (Minutes)
1~25
26~50
51~100
101~255
Read lamp use time from projector.
Read Air Filter Timer from projector.
Read System Status and Temperature from projector in Power On
status.
Read Input Source Selection from projector in Power ON status.
Default Setting Includes 1000/1500/2000/3000 Hours.
When Lamp Timer reaches alert target, window will show lamp
timer in red color to remind user to replace the lamp.
Default setting includes 500/1000/1500/2000/2500 Hours. When
Filter Timer reaches alert target, window will show filter timer in
red color to remind user to replace the filter.
Auto Detect setting. Default setting includes 1/3/5/10 minutes; user
can set the optimal default listed in Table 4.
1/3/5/10
3/5/10
5/10
10<
45
Description
Description
* The maximum quantity of
projector monitored is 255.
< Table 2 >
< Table 3 >
< Table 4 >