Operating With The Remote Control; Displaying And Setting The Break Timer; Displaying The Pointer; Using The Spot Function - Eiki DLP EIP-4200 Owner's Manual

Operating with the Remote Control

Displaying and Setting the
Break Timer
1 1
Press BREAK TIMER.
• The timer starts to count down from 5
minutes.
On-screen display
2 2 Press P/R/O/Q to adjust the
length of the break time.
Increases with P or Q
•
5 minutes ➞ 6 minutes ➞ 60 minutes
Shortens with O or R
•
4 minutes ➞ 3 minutes ➞1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER.
Note
• Break Timer does not function while the
projector is operating the "Auto Sync",
"FREEZE" or "AV MUTE" functions.
32

BREAK TIMER button

FREEZE button

MAGNIFY buttons

POINTER button

SPOT button

Adjustment buttons
(P/R/O/Q)
EFFECT button
PICTURE MODE button

ECO+QUIET button

AUTO SYNC button

Displaying the Pointer

1 1 Press POINTER and press P/R/
O/Q on the remote control to
move the pointer.
• Press EFFECT to change the pointer icon
(5 types).
Star Finger1
2 2
Press POINTER again.
• The pointer will disappear.

Using the Spot Function

1 1 Press SPOT and press P/R/O/Q
on the remote control to move
the spot area.
• Press EFFECT to change the spot area
size (3 types).
1/9 1/25
2 2
Press SPOT again.
• The spot area will disappear.
Switching the Eco+Quiet
Mode
Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to "ON", the
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
Note
• Refer to "Eco+Quiet" on page
Finger2 Heart Underline
1/8
42 for details.