Setting Menu (Pc Mode) - Eiki LC-XIP2600 Owner's Manual

MENU (PC Mode)
Setting Menu
Item
H POSITION
V POSITION
PHASE
FREQUENCY
AUTO
KEYSTONE
KEYSTONE V
AUTO SYNC
AUTO SEARCH OFF/ON
* H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC does not work for Digital
RGB signal.
* The setting data in this Setting Menu is not shown correctly if no signal is fed and projected.
Selection
Move the image position horizontally.
000/100
This function can be used under computer signal input only.
Move the image position vertically.
000/100
This function can be used under computer signal input only.
000/100 Adjust the image sharpness.
000/200 Set the horizontal scanning frequency.
OFF/ON Correct keystone distortion in image automatically.
-70/+70 Correct vertical keystone distortion in image manually.
EXECUTE Set all of the above setting automatically.
Search signal source manually or automatically.
Description
24
Step:
1. U se the ▲ /▼buttons
to select an item.
2. U se the ◄ / ► buttons
to select an item or
adjust the value.