Remote Control - Eiki LC-XIP2600 Owner's Manual

Remote Control

Remote Control Batteries
Installation
1. Remove the battery cover.
2. Load the batteries.
Make sure the poles are correctly oriented.
3. Close the battery cover.
Caution
►Avoid excessive heat and humidity.
►Do not drop the remote control.
► I f the remote control will not be used for an extended period, remove the batteries.
► D o not expose the remote control to water or moisture. This could result in malfunction.
► R eplace the battery when remote control operation becomes sluggish or unresponsive.
► D o not place the remote control close to the exhaust ventilation opening of the projector,
because the exhaust air is hot.
► D o not use batteries of different types at the same time.
► D o not mix a new battery with used one. Make sure the plus and negative terminals are
correctly aligned when loading batteries.
► D ispose of batteries in accordance with environmental laws of your area.
► D o not disassemble the remote control. If the remote control needs service, please contact
your dealer.
19