Modify The Projector Setting - Eiki LC-XIP2600 Owner's Manual

Before Use

Modify The Projector Setting


I f you need to modify the projector's setting, please move mouse cursor to the table
on the left and press button on the column. The contents of the setting will appear on
the right side table.
Note
When DHCP setting is changed, in order to make the change effective AC power to the
projector needs to be disconnected and reconnected.

A fter changing the projector setting, you can save the data by clicking
cancel by clicking
Item
Show the Host name. (16 characters at most in
Projector name
ASCII.)
IP Address Show the IP Address.
Mask Show the Subnet Mask.
Gateway Show the Gateway.
Show up the MAC Address.
MAC
(The default value can not be modified.)
Capture IP address from network Server
DHCP
automatically.

C lick
(register projector), then the projectors will be shown in the Monitor
Window as shown below.
button.
Description
40
< Graph 5 > : Register Table.
< Table 1 > : Setting Windows.
<Graph > Monitor window
button or