Eiki LC-XIP2600 Owner's Manual page 21

Setting Up
How To Connect
Laptop or desktop computer
Connect the audio cable if necessary
1. Please connect the audio cable to the AUDIO IN 1 if the computer cable is connected to
the projector's RGB IN.
2. Please connect the audio cable to the AUDIO IN 2 if the computer cable is connected to
the projector's DVI-I IN.
3. Please connect the audio cable to the AUDIO IN 3 if the video cables are connected to
the VEDIO / S-VIDEO / Component port of the projector.
If the selected video image is not displayed after the projector is turned on and the
correct video source has been selected, please check whether the video source device
is turned on and operating correctly. Also check whether the signal cables have been
connected correctly.
Many laptop computers may need to change the setting for monitor output when
connecting to the projector. Usually a key combination like Fn + F3 or CRT/LCD
key turns the external display on / off. Locate a function key labeled CRT/LCD or a
function key with a monitor symbol on the laptop. Press Fn and the labeled function
key simultaneously. Refer to your laptop's documentation to find out your laptop's
key combination.
18