Getting Started; Plugging In And Starting The Phone - Aastra 6751i User Manual

Getting Started

The 6751i must be set up and configured prior to its first use. This section describes phone
behavior and start up screens you may see when the phone is first plugged in, or when it is
restarted.

Plugging in and Starting the Phone

The 6751i automatically begins the start up sequence as soon as it is connected. The phone goes
through this process the first time you plug in your phone and every time you restart your phone.
The phone displays the following startup screens.
During the first start up the 6751i phone attempts to contact the Redirection and Configuration
Server (rcs.aastra.com) for current server information. No personal information is transmitted
from the phone during this process.
Model 6751i IP Phone User Guide
Note:
Some start up screens only appear the first time you connect your phone,
or if your phone has been factory defaulted.
Aastra 6751i
Firmware Loaded
Initializing
Contacting
Redirector
LLDP
network
3