Aastra 6751i User Manual page 67

1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the
handset or press the speakerphone key.
A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding
them to the conference.
4. Press the DOWN arrow key. The 6751i provides a new dial tone..
5. Enter the phone number of Party 3.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding
them to the conference.
7. Press the DOWN arrow key again to add Party 3 to the conference. Party 1 (which is
yourself), Party 2, and Party 3 are all connected to a single conference.
8. To drop a party from the conference, press the DOWN arrow key once more.
Ending a Conference and Transferring Remaining Parties
The 6751i allows a Host to drop from a 3-way conference and let the other two parties remain
connected by pressing a Xfer key.
If you are the Host of a conference and want to leave that conference:
• While in a 3-way conference press the Xfer key on the phone.
Your phone leaves the 3-way conference but the remaining parties are still connected to the
conference.
Model 6751i IP Phone User Guide
2
You can use 2 and 5 to scroll through and see the numbers and names (if
Note:
available) of the parties in the conference call. When a name is displayed,
pressing 4 drops the displayed party from the call.
Notes:
1. The 6751i does not support scrolling between lines.
2. The Caller ID of the dropped Host still displays on the remaining parties' phones.
=Dial
59