Customizable Callers List Key; Autodial (Hotline And Warmline) - Aastra 6751i User Manual

Customizable Callers List Key

Your System Administrator can specify an XML URI that creates a custom Callers List application
for your phone. When you press the Callers List key, the phone accesses a custom XML URI
Callers List instead of the standard Callers List. Contact your System Administrator for more
information.

Autodial (Hotline and Warmline)

Your System Administrator can configure an autodial feature on your phone. If autodial is enabled,
the phone automatically dials a preconfigured number whenever it is off-hook. Depending on the
configuration specified by your Administrator, the Autodial functions as either a "hotline", or as a
"warmline," as follows:
• Hotline: The IP phone immediately dials a preconfigured number when you lift the handset.
• Warmline: The IP phone waits for a specified amount of time after you lift the handset before
dialing a preconfigured number. If you do not dial a number within the time allotted, then the
IP phone begins to dial the number.
The Autodial feature is available on a global basis only on the 6751i. Contact your System
Administrator for more information.
Model 6751i IP Phone User Guide
Notes:
1. Any speeddial numbers that you configure on your IP phone are not affected
by autodial settings.
2. If Autodial is configured on your phone, the phone does not accept conference
calls, transferred calls, and/or intercom calls.
105