Machine Does Not Print - Ricoh AFICIO 120 Operating Instructions Manual

Machine Does Not Print

Possible Cause
Is the power on?
Is the interface cable properly connected?
Are you using the correct interface cable?
Did you connect the interface cable after turn-
ing on the main switch?
Is the machine Online?
Is the specified paper set?
Are there any error messages on the panel dis-
play?
Does the indicator above the Printer Mode key
stay red?
Is the Data-in Indicator blinking or lit?
Can you print a configuration page?
Can you make a "Print Test Page" from the
printer driver?
Solutions
Turn on the machine.
Connect the interface cable properly.
If there are any connectors or screws, make
sure that they are fastened securely.
Be sure to use the correct one. If the cable is
damaged or worn, replace it with a new one.
Be sure to connect the interface cable before
turning on the main switch.
Make it Online by touching the [Online] key.
Set the specified paper in any of the input
trays.
Check the error message, and take the required
action.
Check the error message, and take the required
action.
If not, the data does not reach the machine.
Check the printer cable connection.
Also confirm that the printer port settings are
correct.
If you cannot, check the printer cable connec-
tion.
Also confirm that the printer port settings are
correct.
If you cannot, the machine might be out of order.
Contact your sales or service representative.
Machine Does Not Print
3
21