System Settings Parameters - Ricoh AFICIO 120 Operating Instructions Manual

System Settings Parameters

This section contains the information about the parameters used for the printer.
Reference
For more information about the other parameters in the System Settings
menu, see the "System Settings" manual.
Menu
1.Function Priority
3.System Reset
6.Auto Off Timer
13Measurement Unit
Description
You can specify the mode (Copier or Facsimile) to be displayed im-
mediately after the operation switch is turned on or System Reset
mode is turned on.
Note
❒ Default: Copier
The machine returns to its prioritized mode automatically after
your job is finished, when you selected the time. This function is
called "System Reset". The time can be set from 10 to 999 seconds,
or no system reset.
Note
❒ Default: On (60 seconds)
❒ You can specify the prioritized mode with the user tools. See
"1.Function Priority".
The machine turns itself off automatically to conserve energy after
your job is finished, after the selected time. This function is called
"Auto Off ". The time can be set from 1 to 240 minutes.
Note
❒ Default: 60 minutes
❒ Auto Off might not be effective when an error message is dis-
played.
❒ To return to the ready condition from Auto Off, the machine re-
quires the same warm-up time as the time for becoming ready
after power is turned on.
❒ When the machine receives a fax or printer data in Auto Off
mode, it automatically prints the fax or the printer data.
You can select the measurement unit.
• mm
• inch
Note
❒ Default: mm
Adjusting System Settings
4
41