When Copying Onto Standard Size Paper; When Copying Onto Custom Size Copy Paper - Ricoh AFICIO 120 Operating Instructions Manual

StellaC1a-EN-CopyF_V4_FM.book Page 29 Wednesday, September 12, 2001 4:03 PM
When copying onto standard
size paper
Important
❒ You should specify the size of pa-
per to avoid paper misfeeds.
Note
❒ The default copy paper size for the
paper tray and the bypass tray is
" × 11"L
1
A4, 8 /
2
A A A A
Press the { { { { R/#} } } } key.
B B B B
Make sure that "Standard Size" is
selected, and then press the { { { { OK} } } }
key.
Note
❒ If not, press the 0 or 1 key to
select it.
C C C C
Press the 0 0 0 0 or 1 1 1 1 key to select pa-
per size, and then press the { { { { OK} } } }
key.
Copying from the Bypass Tray
When copying onto custom
size copy paper
Important
❒ You should specify the size of pa-
per to avoid paper misfeeds.
A A A A
Press the { { { { R/#} } } } key.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to select
"Custom Size", and then press the
{ { { { OK} } } } key.
C C C C
Enter the horizontal size of the
paper with the number keys, and
then press the { { { { OK} } } } key.
Note
❒ To change the number entered,
press the { { { { Clear/Stop} } } } key, and
then enter the new number.
2
29