Settings You Can Change With The User Tools - Ricoh AFICIO 120 Operating Instructions Manual

StellaC-EN-CopyF_V4_FM.book Page 57 Wednesday, July 4, 2001 11:23 AM
Menu
3. Set Ratio
4. Copy Reset Timer
5. Orig. Orientation
6. Bypass Paper Type
7. Key Op. Tools
1. User Code Access
2. Check Copy Counter
3. Print Counter List
4. Reset Counter

Settings You Can Change with the User Tools

Description
Select which Reduce, Enlarge or Input Ratio is shown on the panel
display with priority when the { { { { Reduce/Enlarge} } } } key is pressed.
Note
❒ Default:
" × 11" → 5
1
• Ratio 1: 65% 8 /
2
" × 14" → 8
1
• Ratio 2: 78% 8 /
2
• Ratio 3: 93%
" × 8
1
• Ratio 4: 129% 5 /
2
" × 8
1
• Ratio 5: 155% 5 /
2
The machine returns to its initial condition automatically after
your job is finished. When you set the time, select "1. On/Off" to
"On" and then set the "2. Timer" to the desired time. The time can
be selected from 10 to 999 seconds.
Note
❒ Default:
• 1. On/Off: On
• 2. Timer: 60 sec.
You can select the orientation of originals with Combine mode.
Note
❒ Default: Off
You can select the type of paper for the bypass tray.
Note
❒ Default: Thick
If the machine is set to use the User Code function, operators must
enter their user codes before the machine can operate.
The machine can keep count of the number of copies made under
each user code.
Specify whether to employ user codes to restrict copier users, and
manage the number of copies made.
Note
❒ Default: Off
You can check the number of copies made under each user code.
You can print counter lists.
You can check the number of copies made under each user code.
You can also reset each user code's counter to 0.
" × 8
1 1
/ / "
2 2
" × 11"
1
/
2
" → 8 " × 11"
1 1
/ /
2 2
" → 8 " × 14"
1 1
/ /
2 2
4
57