Brickcom CB-100A Series User Manual page 44

RTP with Quantization Table Header : Choose this option to explicitly include JPEG
quantization table in the RTP stream [RFC 2435, section 3.1.8].
HTTP Transport: If MJPEG is used for Video Codec, HTTP Transport protocol must
be enabled to remotely access the video stream.
NOTE - a higher bitrate will use higher network bandwidth. The video quality can be
set between Level 1 to Level 6, with Level 6 producing the best image quality.
HTTP Transport – If MJPEG is used for Video Codec, users can enable HTTP Transport
protocol for video communication.
NOTE – HTTP Transport is for non-IE browser used only.
Click Apply to apply settings or Cancel to cancel changes.
Video Overlay
Timestamp
To display the date and time on the screen during live view, check "Enable" to enable the
timestamp function and select the display position from the drop-down menu.
Text
To make a note about the camera, check "Enable" and select the display position from the
drop-down menu. Enter a video description in the text box.
Click Apply to apply settings or Cancel to cancel changes.
NOTE - The video overlay will only takes effect in stream 1.
- 37 -