Mounting The Dome Camera; Power On And Boot-Up Sequence - Honeywell ScanDome iii HSDC-251N/P Operation & Programming Manual

2.7 Mounting the Dome Camera

Once all DIP switches are set appropriately and all external connections are made, the dome
camera can be mounted.
The ScanDome camera is designed to mount on a structural surface supporting loads up to 5
Kg. See Figure 8.
Lock CW
Unlock CCW
Fasten Screw
Figure 8 – Example of a ceiling mounted installation

2.8 Power on and Boot-up Sequence

When the power is applied to the dome camera, it will start a boot-up sequence. When boot-up
is done, the following information is displayed on the monitor screen.
14