Configuration Information - Factory Integrated Models; Step 1: Base Configuration - HP ProLiant DL385 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: HP does not allow factory integration of options into standard models listed above. NOTE: NOTE: NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE: NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: NOTE:
NOTE: FIO indicates that this option only available as a Factory Installable Option. NOTE: NOTE: NOTE:

Step 1: Base Configuration

Step 1: Base Configuration Step 1: Base Configuration Step 1: Base Configuration
Models Models Models Models
Step 1A: If SAS Model, Choose SAS Starter Kit or Controller (only one of the following) Step 1A: If SAS Model, Choose SAS Starter Kit or Controller (only one of the following) Step 1A: If SAS Model, Choose SAS Starter Kit or Controller (only one of the following) Step 1A: If SAS Model, Choose SAS Starter Kit or Controller (only one of the following)
SAS Controller SAS Controller SAS Controller SAS Controller
SAS Starter Kit SAS Starter Kit SAS Starter Kit SAS Starter Kit
HP ProLiant DL385 Rack CTO Chassis, (SCSI)
Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with:
Embedded NC7782 PCI-X Gigabit Server Adapter
Ultra320 Smart Array 6i Controller (integrated on system board)
Three available 64-bit PCI-X slots, including two non-hot plug 100MHz slots and one
non-hot-plug 133MHz slot
575 Watt hot plug power supply, CE Mark Compliant
One Lowline NEMA power cord and One Highline IEC Power cord
5 hot plug fans
Rack (2U), (3.5-inch)
HP ProLiant DL385 Rack CTO Chassis, (SAS)
Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with:
Embedded NC7782 PCI-X Gigabit Server Adapter
Three available 64-bit PCI-X slots, including two non-hot plug 100MHz slots and one
non-hot-plug 133MHz slot
575 Watt hot plug power supply, CE Mark Compliant
One Lowline NEMA power cord and One Highline IEC Power cord
5 hot plug fans
Rack (2U), (3.5-inch)
HP Smart Array P600/256 BBWC Controller
NOTE: This is a required selection if one of the two following SAS Starter Kits is not NOTE: NOTE: NOTE:
selected. If choosing this part number, 2.5" SAS hard drives must still be selected
under Step 4.
SAS Starter Kit - 36GB
NOTE: NOTE: NOTE: Includes Smart Array P600/256 BBWC Controller and (2) 36GB SFF SAS NOTE:
Universal Hard Drives.
SAS Starter Kit - 72GB
NOTE: Includes Smart Array P600/256 BBWC Controller and (2) 72GB SFF SAS NOTE: NOTE: NOTE:
Universal Hard Drives.
DA - 12162 North America — Version 37 — September 25, 2007
HP ProLiant DL385 HP ProLiant DL385 HP ProLiant DL385 HP ProLiant DL385
382608-405
393622-405
337972-B21
396221-B21
396220-B21
Page 15