Clients And Protocol Descriptions - 3Com 3C389 User Manual

7 Select one or more of the clients and protocols and
click Continue.
The IBM LAN Client Configuration window appears.
Table 4-1 Clients and Protocol Descriptions
Client or Protocol
NETWARE CLIENT 32
(IPX/SPX)
DOS LAN SERVICES
(DLS)
NetBIOS
IEEE 802.2
TCP/IP
8 Enter the parameters for Install Options, Network
Options and if appropriate, for TCP/IP or NetWare
Client 32.
On the IBM LAN Client Configuration window, there are
two or more folder tabs. The Install Options and NetWork
Options folders always appear. The TCP/IP and NetWare
Client 32 folders appear only when they are selected for
in the IBM LAN Client IBM Installation window. Make
sure that you enter all requested information.
Description
NetWare Client 32 is Novell's version of client
software. You cannot select both NetWare Client and
DOS LAN Services
DLS is the DOS client software for IBM LAN and Warp
servers. When you select DLS, you must provide the
following information:
User Name
Machine ID
Domain Name
When you select DLS, NetBIOS is automatically selected
as well. You cannot select both DLS and NetWare
Client
When you select NetBIOS, device driver parameters
cannot be set in LANAID. You can find up-to-date
information about the NetBIOS device driver
parameters in LNCLIENT.TXT in the \LNCLIENT
subdirectory.
Choose 802.2 when you are using the IEEE 802.2
protocol on your LAN. When you select 802.2, driver
parameters cannot be set in LANAID.
This option is available under Windows or Windows for
Workgroups only. Choose TCP/IP when you are using
the TCP/IP protocol on your network.
When you select TCP/IP, you are required to select a
local IP address and default gateway. The local subnet
mask is set to 255.255.240.0 by default.
Installing LANAID 4-5