Ibm Lan Support Program/Native Installation - 3Com 3C389 User Manual

10 Click OK when you have finished selecting and
editing protocols in the Configuration panel.
11 Click Close on the Configure panel.
12 Click Exit in the MPTS dialog box.
13 Click Exit on the Update CONFIG.SYS panel to update
the CONFIG.SYS file.
14 Click OK when you get the message that the
CONFIG.SYS has been successfully updated.
15 Click Exit on the Exiting MPTS panel.
16 Shut down OS/2 and restart your PC to let the
changes take effect.
OS/2 NDIS 2 device driver using MPTS installation is
complete when the following conditions exist:

IBM LAN Support Program/Native Installation

The LAN Support Program/Native (LSP Native) installs the
LAN support driver DXMCSMOD.EXE. It does not support
the NDIS environment and should not be used for the
installation of NDIS drivers.
Perform the following installation steps for the 3C389 PC
Card when using DOS and LSP Native:
1 Insert TokenDisk diskette #2 into the floppy drive
and type:
a:\lspnativ\dxmaid [Enter]
IBM LAN Support Program/Native Installation
The device driver files load successfully and there are
no error messages.
You are able to log on and communicate with the
network.
If you experience problems, go to Chapter 5,
"Troubleshooting."
3-15