3Com 3C389 User Manual page 42

3-16 C
HAPTER
The default configuration will install both the 3C389
PC Card driver for Native mode (DXMCSMOD.SYS) and
the NetBIOS interface (DXMT0MOD.SYS). DXMCSMOD is
a card-services-aware version of DXMC0MOD, the native
token ring driver that comes with the LAN Support
Program (LSP). A Card Services enabler is no longer
necessary to use LSP. DXMCSMOD.SYS supports Card
Services 2.1 and utilizes a parameter initialization file
called LSP.INI to read in configuration options. The LSP.INI
file is similar to the PROTOCOL.INI file that is used in the
NDIS environment.
2 Make a note of the name of the directory (default is
LSP) where the LSP is installed. You will have to
specify this name when LANAID asks for the directory
containing your LSP.INI file during step 2. Also, if you
are using a locally administered address, edit the
LSP.INI file and add:
netaddress=yyyyyyyyyyyy
where yyyyyyyyyyyy is the 12-digit hexadecimal
address.
3 Configure the 3C389 PC Card using the LANAID
program (See Chapter 4).
4 If LANAID is not already installed, go to the section
"Installing LANAID" in Chapter 4.
5 After LANAID is installed, continue with Chapter 4
"Using LANAID to Configure the 3C389 PC Card."
When you get to the panel that asks for the existing
network operating system, select IBM LSP/Native.
3: I N
NSTALLING THE
D
ETWORK RIVERS