Dos Client 16 For Novell Netware 4.01 And Above Installation - 3Com 3C389 User Manual

3-12 C
HAPTER
OS/2 NDIS 2 device driver using LAPS installation is
complete when the following conditions exist:
DOS Client 16 for Novell NetWare 4.01 and
Above Installation
1 Insert the Novell 4.01 Diskette into the floppy disk
drive.
2 Type:
install [Enter]
Follow the steps on the panels as they appear.
3 Record the client directory name in order to do a
client installation.
The default directory name is C:\NWCLIENT.
4 At the Insert the driver disk window, insert
TokenDisk diskette #2 and type:
a:\novell\dos [Enter]
5 Select Other drivers.
6 Choose 3Com TokenLink Velocity PC Card.
7 At the Settings for 3Com TokenLink Velocity PC Card
window, press [Esc].
8 At step 5, press [Enter] to finish installing NetWare.
9 Press Enter to exit the installation tool.
10 Configure the 3C389 PC Card.
11 If LANAID is not already installed, install it as
described in Chapter 4 in the section "Installing
LANAID."
3: I N
NSTALLING THE
The device driver files load successfully and there are
no error messages.
You are able to log on and communicate with the
network.
If you experience problems, go to Chapter 5,
"Troubleshooting."
D
ETWORK RIVERS