Windows 98 Installation; Windows 95 Installation - 3Com 3C389 User Manual

Windows 98 Installation

You will need your Windows 98 CD during installation,
unless you have copied the .CAB files to your hard disk.
TokenDisk diskette #6 contains the device driver for
Windows 98.
1 Insert the PC Card and connect the cable to the card
as described in Chapter 2.
2 Turn on the computer and start Windows 98.
Windows 98 automatically detects the card and displays
the New Hardware Found dialog box and the Start
building a driver information database.
3 Click Next when the Add New Hardware Wizard
appears.
4 Insert TokenDisk diskette #6.
5 Select Search for the best driver for your device
(recommended) then click Next.
6 Select Specify a location and make sure that no
other boxes are checked.
7 Below Specify a location, type a:\win98 and click
Next.
8 Click Next and the Start building a driver
information database displays.
9 When prompted, insert the Windows 98 CD.
10 Click Finish.
11 When Windows 98 prompts whether to reboot the
computer, remove TokenDisk diskette #6 from the
floppy drive and click YES to restart the computer.

Windows 95 Installation

You will need your Windows 95 diskettes or CD during
installation, unless you have copied the .CAB files to your
hard disk.
Windows 98 Installation 3-3