Disabling Load Balancing For A Group; Changing The Primary Nic; Removing A Nic From A Group - 3Com EtherLink 3C980C-TXM User Manual

40 C
HAPTER

Disabling Load Balancing for a Group

1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window:
a Select a group from the Load Balancing/RSL Groups list.
b Click Properties.
3 In the Group Properties dialog box:
To disable receive load balancing only—Clear the
Receive Load Balance Enabled check box.
To disable all load balancing—Clear the
Receive Load Balance Enabled and the
Transmit Load Balance Enabled check boxes.
4 Click OK.

Changing the Primary NIC

The first NIC added to an empty group is automatically
designated the primary NIC. NICs added subsequently are
designated as secondary NICs. Primary status is indicated
by a P icon at the beginning of the NIC name. When there
are more than one NIC in a group, you can change the
primary NIC as follows:
1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window, select a secondary
NIC from the Load Balance/RSL Groups list.
3 Click Select Primary.
The NIC you selected becomes the primary NIC.

Removing a NIC from a Group

1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window, select a NIC from a
group in the Load Balancing/RSL Groups list.
3 Click Remove NIC.
3: I C
NSTALLING AND
W
ONFIGURING IN INDOWS