30
C
HAPTER
b In the next window, right-click a connection and select
c Click Configure.
d In the NIC Properties window, click the Advanced tab.
e In the Advanced window, you can configure the SHD
Verifying Successful Installation
Follow the procedure for your operating system.
Windows NT
1 Double-click the My Computer icon, then the
Control Panel icon, and then the Network icon.
2 Select the Adapters tab.
3 Make sure that the name of the NIC appears in the list
of network adapters.
Windows 2000
1 Right-click My Network Places and select Properties
from the menu.
2 Check connections in the Network and Dial-up
Connections window.
Updating Software in Windows
The following procedures update a previous installation
of the network driver and NIC diagnostic software
in Windows.
Windows NT
1 Turn on the power to the computer and start
Windows.
2 Insert the 3Com EtherLink Server CD in the CD-ROM
drive.
3: I
NSTALLING AND
Properties from the menu.
parameters. Select a parameter in the Property field and
change its value in the Value field. For parameter
descriptions, see
page
27.
C
W
ONFIGURING IN
INDOWS
SHD Parameters (Windows) on
Need help?
Do you have a question about the EtherLink 3C980C-TXM and is the answer not in the manual?