Table of Contents
Advertisement
3
Software Installation Requirements
Before you install software, you may want to verify that
the installed server NICs are functional or change their
configuration settings by running DOS diagnostics. Use the
3C90XCFG.EXE program located on the 3Com EtherLink
Server CD.
If you are installing the software during the installation of
the network operating system, see
While Installing the NOS on page
For a list of installation requirements, see
Requirements on page
Getting Help
To display the Help system during the software installation,
click Help on any 3Com window.
Installing in Windows NT
Before you begin software installation:
Use the following procedure to install the driver and
DynamicAccess technology server features for the first time
in a computer that is running Windows NT. (If you are
updating a previous installation, see
Windows on page
1 Boot the computer and start Windows NT.
2 Log in to the Windows NT Administrator account.
I
NSTALLING AND
C
ONFIGURING IN
Make sure that all installation requirements are met.
See
Installation Requirements on page
Install the hardware. See
NIC on page
20.
17.
Installing and Connecting the
30.)
W
INDOWS
Installing a 3Com NIC
83.
Installation
17.
Updating Software in
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the EtherLink 3C980C-TXM and is the answer not in the manual?