Operating The Grill Gas Burner - Siemens HG193510ME Installation Instructions Manual

Operating the grill gas burner

Switching on the grill gas
burner
Switching off the grill gas
burner
If the flame goes out
58
Please note that the appliance door must be closed
during grilling.
1.
Open the appliance door.
2.
Press the control knob for the grill and turn it anti-
clockwise to position J .
The gas burner ignites.
Keep the control knob pressed for a few seconds
until the flame stabilises.
Do not turn the knob beyond this setting.
3.
Adjust the burner to the desired flame setting.
Setting
Ÿ
J
The flame is not steady between position
> and J. Therefore, always select a position
between J and Ÿ .
4.
Carefully close the appliance door.
When the dish is ready, turn the control knob
clockwise to position > .
Switch off the control knob. Wait one minute and
switch the burner on again.
m
If the flame goes out, gas will escape. Never leave
the gas burner unattended during operation. Ensure
that there are no draughts.
Meaning
lowest flame setting
highest flame setting