Gas Connection - Siemens HG193510ME Installation Instructions Manual

Gas connection

Gas connection on the
appliance
Default setting of the
burners
The appliance must be connected in accordance with
the currently applicable regulations.
Before installing the appliance, check that the local
conditions (type of gas and pressure) are compatible
with the appliance settings. The permissible
appliance settings can be found on the rating plate.
Connection to the gas lines and seal fitting must be
carried out professionally according to the currently
applicable standards.
The gas connection (ISO 228-1, 1/2") is located at the
rear left of the appliance.
The following connections are provided with the
appliance:
Connecting
pieces
The burners are set up for G30 liquefied gas (29
mbar) on delivery.
A nozzle set for G20 natural gas (20 mbar) is supplied
with the appliance.
Description
Connecting piece ISO 228-1/ISO
7-1
(and seal)
LPG corrugated tube union
(and seal)
11