Before Using The Oven For The First Time; Heating Up The Oven; Setting Procedure For The Lower Gas Burner; Setting Procedure For The Gas Grill In The Oven - Siemens HP22B511M Instruction Manual

Free standing cooker
Hide thumbs Also See for HP22B511M:
Table of Contents

Advertisement

After-sales service products
You can obtain suitable care and cleaning agents and other
accessories for your domestic appliances from the after-sales
Cleaning cloths for stainless-steel surfaces Product no. 311134
Oven and grill cleaning gel
Microfibre cloth with honeycomb structure Product no. 460770
Door lock

Before using the oven for the first time

In this section, you can find out what you must do before using
your oven or gas hob to prepare food for the first time. First
read the section on Safety information.

Heating up the oven

To remove the new cooker smell, heat up the oven when it is
empty and closed. Ensure that no packaging material has been
left in the cooking compartment.

Setting procedure for the lower gas burner

Example in the picture: Heat at 270 °C
Open the top cover. The top cover must remain open for as
1.
long as the oven is in operation.
Open the main gas supply to the appliance. Connect the plug
2.
in the socket. Open the oven door.
Push in the switch for the lower gas burner and turn it to
3.
270 °C.
While holding the switch for the oven's lower gas burner
4.
depressed, press the ignition button
The gas escaping from the oven's lower gas burner is ignited
5.
using the ignition button. To activate the safety pilot, press
and hold the lower gas burner on the oven for 10 seconds.
Look through the inspection port to make sure that the flame
6.
is lit. If it is not, repeat the process from step 3.
Close the oven door slowly.
7.
Turn off the switch for the lower gas burner after 30 minutes.
8.

Setting procedure for the gas grill in the oven

Open the top cover. The top cover must remain open for as
1.
long as the oven is in operation.
Open the main gas supply to the appliance. Connect the plug
2.
in the socket.
10
Product no. 463582
Product no. 612594
8
.
service, specialist retailers or (in some countries) online via the
e­Shop. Please specify the relevant product number.
Reduces the build-up of dirt. Impregnated with a special oil for
perfect maintenance of your appliance's stainless-steel sur-
faces.
For cleaning the cooking compartment. The gel is odourless.
Especially suitable for cleaning delicate surfaces, such
as glass, glass ceramic, stainless steel or aluminium. The
microfibre cloth removes liquid and grease deposits in one go.
To prevent children from opening the oven door. The locks on
different types of appliance door are screwed in differently.
See the information sheet supplied with the door lock.
Insert the protective plate into the groove under the control
3.
panel.
The protective plate is inserted with the longer edge at the
front and the curvature pointing downwards.
Secure the protective plate in the groove underneath the
control panel using the retainers.
Make sure that the protective plate is engaged in the
retainers. If the protective plate cannot be pulled out, it is
correctly engaged. You can now use the protective plate
safely. Otherwise, insert the protective plate into a groove at a
slightly higher angle and make sure that it engages in the
retainers.
Close the oven door so that it touches the protective plate.
4.
Press the function selector and turn it clockwise to the
5.
grill setting.
Keeping the function selector pressed, push the
6.
button.
The gas escaping from the gas grill is ignited using the
7.
ignition button. To activate the safety pilot, press and hold the
function selector for 10 seconds.
Check that the flame is lit. If it is not, repeat the process from
8.
step 5.
After 30 minutes, switch off the function selector. Once the
9.
oven has cooled down, remove the protective plate again.
#
ignition
8

Advertisement

Table of Contents
loading

Table of Contents