Faults And The After-Sales Service - Siemens HG193510ME Installation Instructions Manual

Faults and the after-sales service

Fault
The door panel steams up when
the oven is hot.
The flame (oven) does not burn
through all outlet openings.
The appliance does not work.
All dishes that are prepared in
the oven become burnt very
quickly.
The oven lighting has failed.
78
Malfunctions often have simple explanations.
Please read the following notes before calling the
aftersales service.
Possible cause
Normal occurrence;
caused by the
difference in
temperature.
Normal build-up of dirt
Defective circuit
breaker
Power cut
Thermostat faulty
Oven light is faulty
Repairs may only be carried out by fully trained after-
sales service engineers.
If your appliance is not repaired professionally, you
may be exposing yourself to substantial risks.
Remedial action
Not possible; this has no
effect on oven performance.
The burner must be
professionally cleaned.
Look in the fuse box and
check that the circuit breaker
for the appliance is in
working order.
Check whether the kitchen
light works, for example.
Call the after-sales service.
Replace the oven light.
(see section "Replacing
oven light")