Replacing the oven light bulb
If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained
from the after-sales service or from specialist
retailers. Please specify the E number and FD
number of your appliance. Do not use any other type
of bulb.
Proceed as follows:
1.
Switch off the relevant circuit breaker in the fuse
box.
2.
Open the appliance door.
3.
Lay a tea towel in the cooking compartment if it is
cold to prevent damage.
4.
Unscrew the glass cover from the bulb inside the
cooking compartment by turning it anti-clockwise.
5.
Replace the bulb with one of the same type.
Voltage: 230 V
Power: 15 W
Thread: E14
Temperature resistance: 300°C
6.
Screw on the glass cover again.
7.
Remove the tea towel and switch the circuit
breaker back on.
Press the function button the oven lighting until it
locks into place in order to check whether the oven
lighting is working properly.
79