Operation In A Pabx - Gigaset S44 User Manual

Operation in a PABX

Operation in a PABX
i
Pay attention to the special features for SMS in a PABX (page 62).
Access code
Requirement: If your telephone is connected to a PABX,
depending on the PABX, you must enter an access code (outside line code) for external
calls when the phone is first installed. Refer to the user guide for your PABX. You can
enter an access code (one to four digits).
For incoming calls, the access code is automatically placed in front of the caller's phone
number in the display and in the caller lists, and likewise when copied to the directory.
The saved phone number can then be dialled directly, e. g. from the caller list (page 45).
¢ ¢
v Ð
Base
~ Í
s
Save entry
i
For manual dialling and entering directory, emergency and direct dial
numbers you must also enter the access code.
Activating/deactivating call transfer – ECT (Explicit Call Transfer)
Requirements:
If you want to connect two callers directly with one another (page 34), then this func-
tion must be activated.
¢ ¢
v Ð
Base
s
Transfer(ECT)
i
If you activate this function, it will automatically be switched to the
Ext. enq. call (= in the telephone exchange) (page 30).
116
¢ ¢
Settings System settings
Enter access code and open the menu.
Confirm.
OK
¢ ¢
Settings ISDN settings
Select and confirm (‰ = activated).
OK
¢
Access code