Table of Contents
Advertisement
SMS (text messages)
on a PABX
SMS
You can only receive a text message if Calling Line Identification is forwarded to
the extension on the PABX (CLIP).
The CLIP for the phone number of the SMS centre is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the
SMS centre with an access code (this depends on your PABX). You can store the access
code in your base station (page 116).
If in doubt, you can test your PABX, e. g. by sending a text message to your own number
and putting the access code before the number of the SMS centre. If you do not receive
this message, send another one, this time without the access code.
When you send text messages, your sender number may be sent without your extension
number. In this case. the recipient cannot reply to you directly.
Errors when sending and receiving a text message
Errors when sending a text message
Text messages that cannot be sent are assigned an error status e. g. FD error: and are
saved in the incoming message list.
The following error codes are displayed:
Error code
Description
E0
Calling Line Identification is permanently deactivated (page 25).
FE
Error occurred during SMS transfer.
FD
Connection to SMS centre failed.
Text messages cannot be sent or received if the number of an
SMS centre is missing or incorrectly stored. Check that the number of
the SMS centre has been correctly stored.
C3
Wrong recipient phone number
You can display information about the cause of errors on the screen.
Requirement: You have opened the incoming message list (page 57).
s
à
s
Error status
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
62
Scroll to the text message you were unable to send.
Press the display key to open the menu.
Select and confirm. The cause of the error appears in
OK
the display.
Now press the display key to return to the incoming
message list.
Advertisement
Table of Contents
