Care; Contact With Liquid; Operation With A Pabx - Gigaset A200 Brief Overview

Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix.fm / 12.06.2003

Care

Wipe the base station and handset with a damp cloth or with an antistatic wipe. A dry
cloth must never be used. This can cause static discharge.

Contact with liquid

Should the handset come in contact with liquid, under no circumstances switch on
the device. Remove all batteries immediately.
Allow the liquid to drip out of the device and afterwards dab all parts dry.
Place the handset without the batteries in a warm, dry place for at least 72 hours. In
many cases it will subsequently be possible to put the phone into service again.

Operation with a PABX

The following settings are only necessary if your PABX requires them, please refer to
the operating instructions for your PABX.
Changing the dialling procedure
You have the following options for the dialling procedure:
Tone dialling (DTMF),
◆
Pulse dialling (IWV).
◆
¢
MENU
BASE SET
[__________] [______]
OK
Temporary switch to tone dialling (DTMF)
If your PABX works with pulse dialling but you need tone dialling for a call
(e.g. to listen to an external mail box/answering machine), you must
i
switch to pulse dialling during the call.
Requirement: You have already started the call.
MENU
Setting the flash time
¢
MENU
BASE SET
[__________] [______]
OK
!
¢ ¢
ADD FEATURES
Select dialling procedure and confirm.
Long press (return to idle status).
¢
TEMP TONE
¢ ¢
ADD FEATURES
Select flash time (80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms or 600 ms) and confirm.
Long press (return to idle status).
DIAL MODE
TBR
Appendix
29