Operating The Base On A Router/Pabx - Gigaset CL390A Duo Manual

Extending the functionality of the phone

Operating the base on a router/PABX

Operation with a router
When operating on the analogue connection of a router, any echoes occurring can be reduced
by enabling XES Mode (XES = eXtended Echo Suppression).
¤
Menu Settings
If there are no problems with echoes, this function should be disabled.
Operation with a PABX
The following settings are only necessary when your PABX requires them (
user guide). Enter the digits slowly one after the other.
Changing the dialling mode
¤
Menu
= Tone dialling (DTMF); 1 = Pulse dialling (PD)
Setting the flash time
¤
Menu
0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;
7 = 800 ms Enter digit
Changing pause after line seizure
You can set the length of the pause inserted between pressing the Talk key
the phone number.
¤
Menu
flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
Changing pause after recall key
¤
Menu
flashes: 1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms
34
OK System
OK
Enter digit
OK XES Mode
The digit for the dialling mode set flashes: 0
Enter digit OK
The digit for the current flash time flashes:
The digit for the current pause length
OK
The digit for the current pause length
Enter digit OK
OK ( = enabled)
refer to the PABX
and sending