Operating The Base On The Pabx; Operating The Telephone On A Router - Gigaset WIDEX W570A Manual

Operating the base on the PABX

The following settings are only necessary if your PABX requires them; see the PABX user guide.
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a connection
(e.g., to listen to the network mailbox), you must switch to tone dialling for the call.
Prerequisite: You are conducting a call or have already dialled an external number.
¤
Press the star key
Tone dialling is now activated for this call only.
Setting recall
¤
Menu
= 80 ms;
= 600 ms;
Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key
phone number.
¤
Menu
= 1 second;
Changing the pause after recall key
¤
Menu
= 800 ms;

Operating the telephone on a router

Operation with a router
When operating on the analogue connection of a router, potentially occurring echoes can be
reduced by switching on XES mode 1 ( XES = "eXtended Echo Suppression").
If there are no problems with echoes, the normal mode (factory settings) should be activated.
¤
¤
OK (for normal mode)
¤
OK (for XES mode 1)
.
= 100 ms; = 120 ms;
= 800 ms OK
= 3 seconds;
= 1600 ms; = 3200 ms
Operating the base on the PABX
Enter digits for recall:
= 400 ms;
Enter digit for the current pause length:
= 7 seconds OK
Enter digit for the current pause length:
OK
= 250 ms; = 300 ms;
and sending the
49