Operation With A Pabx - Gigaset E720 Manual

Operation with a PABX

To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on PABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode OK . . . use
Setting the flash time
¤
. . . use
. . . possible flash times are listed
Saving an access code (outside line code)
Setting the access code (e.g. "0") for dialling using the fixed line network.
¤
. . . use
OK . . . then
Fixed line network:
Rule:
Save:
The access code never prefixes any SMS service centre numbers.
to select Settings
to select Tone or Pulse
to select Settings
. . . use
to select Settings
¤
Access external line with: . . . use
code, max. 3 digits
¤
For . . . use
dialled
Call Lists: The access code will only prefix numbers from a list (list
of answered calls, list of missed calls, SMS list, answer machine list).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any
telephone number.
¤
Save
OK Telephony
Select (
OK Telephony
to select flash time
OK Telephony
to select when the access code should be
Operation with a PABX
OK Dialling
= selected)
OK Recall
Select ( = selected)
OK Access Code
to enter or change access
OK
73