Operation With A Router; Operation With A Pabx - Gigaset E370 User Manual

Gigaset E370 / LUG IM-Ost en / A31008-M2815-R601-1-TK19 / extending.fm / 9/18/17
Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings
De-registering a repeater
¤
OK . . . use

Operation with a router

When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 does not sufficiently suppress the occurring echoes: activate XES mode 2.
¤
If there are no problems with echoes, the normal mode (factory settings) should be
activated.

Operation with a PABX

To find out which settings are required for a PABX, please refer to the PABX user guide.
Setting Tone or Pulse dialling mode
¤
Mode
System Repeater
. . . use to select
to select repeater
OK Normal mode
OK XES mode 1
OK XES mode 2
. . . use to select
OK . . . use to select Tone or Pulse
Press and hold the Registration/paging
Settings OK System
De-reg. Yes
. . . press one of the following keys
Settings OK Telephony
Select (
Operation with a router
OK Repeater
OK Dialling
= selected)
43