Registering/Deregistering Handsets - Gigaset S44 User Manual

Registering/deregistering handsets

The handset can be registered on up to four base stations.
If all internal numbers for wireless terminals are already assigned on your telephone,
before registering make sure that you deregister another handset that is no longer
required (page 21).
You must initiate handset registration on the handset and on the base station.
1. Prepare base station for registration (see user guide for base station).
2. On the handset (within 60 sec.):
¢ ¢
v Ð
Handset
s
Base 1
~
OK
s
INT11: Int.11
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
i
The handset cancels the base station search after 60 seconds. If the hand-
set has not registered within this time, repeat the process.
Deregistering handsets
You can deregister any registered handset from any registered handset.
¢ ¢
v Ð
Base
s
INT16: Int.16
a
¢
Register H/Set
Select base station (1–4) and confirm, e. g. Base 1.
OK
Enter the system PIN of the base station (the default
is 0000) and confirm. The display shows Reg-
str.Procedure and the name of the base station,
e. g. Base 1.
Once the handset has located the base station, the
list of free internal numbers is shown in the display.
Select the internal number and confirm,
OK
e. g. INT11: Int.11.
¢ ¢
Settings Setup user
Select the handset that you wish to deregister and
OK
confirm, e. g. INT16: Int.16.
Press and hold (back to idle status).
Registering/deregistering handsets
¢
De-reg. device
21