Setting Ip Addresses On Pcs; Windows Xp - Siemens Gigaset Powerline Adapter 200 User Manual

Defining IP addresses

Setting IP addresses on PCs

PCs are configured by default to obtain their IP addresses automatically. You can change
this via the PC network configuration.
The network configuration differs depending on the Windows operating system you are
using. Below is the procedure for Windows XP. The procedure for Windows 2000 is
described on page 31ff.

Windows XP

To set a static IP address for your PC:
ì
Click Start – Control Panel.
ì
Select Network and Internet Connections and then click the Network Connec-
tions icon.
ì
Double-click the LAN connection with which you are connected to the
Gigaset Powerline Adapter 200.
ì
On the General tab click Properties.
28