Login; Reset - Siemens Gigaset Powerline Adapter 200 User Manual

Login

The login screen appears:
ì
Enter the password and click OK.
As supplied, the default password is admin.
Please remember:
For security reasons you should change the password at a later stage
(see page 21).
A screen with security information is displayed.
For the initial configuration you can skip this information. If you carry out all the settings
as described below, your device and network will be fully protected. If not, the next time
you log on you will be informed of security gaps in the configuration program.
ì
Click OK.
You will now see the configuration screen for your Powerline network (see page 19).
The configuration session logs off automatically if no user access occurs for about 5
minutes.

Reset

You can reset the configuration of your Gigaset Powerline Adapter 200 to the factory
settings, mainly if you forgot your system password.
ì
On the login screen select Reset.
ì
Enter the serial number of your device. The serial number is located on the bottom
of the device.
ì
Click OK to reset the device.
Do not disconnect the Gigaset Powerline Adapter 200 from your PC or from the power
supply while resetting.
Configuration
17